|Model||hydraulic heat press machine|
|Feature||Auto open design+High pressure|
Advantage of hydraulic heat press machine
1. high quality as well as good price,good after-sale service.
2. The machine adopted automatic hydraulic fitting pressure, it can transfer the lower pressure to higher compress pressure. (pressure up to 30kg/cm2), bigger than pneumatic heat press machine.
3. It contains two locations, paralleled moving the bottom work tables left and right, very smooth, much more convenient and faster, save labour and time at one time.
4. This machine adopts thicken heat plate to ensure the temperature more equality and steady. Perfect heat press effect.
5. The pressure can be adjusted according to the thickness of the material
6. it can be widely used for the factory massproduction and DIY shop ,Home business
Please note: Users should operate the machine with ground wire connected
1. turn on the power switch, the power indicator
2. start the machine ,Set the proper temperature (Normally 130-230ºC). and time(Normally 8~25Second) on the Thermostat&timer controller, When the temperature reach the seted temperature,the red light extinguished, then press the hydraulic switch
3. Turn the Auto&Manual Switch to the automatic,the operation state is automatic, slide the bottom plate to its position. When the bottom plate reach the right place, the heat plate press automatic. When the seted time finish, the heat plate rise automatic
4. Turn the Auto&Manual Switch to the manual , it becomes manual state . That means you should slide the working table to the right place,then press the green manul start switch, then the heat plate press dow n ; When the seted time come down to finish, the heat plate rise automatic ,peel off the paper and done
5. When the Auto&Manual Switch is in middle state, the machine will not work.
6. Red round switch is "emergency stop" button, if you press this button, the whole machine will stop working, the heating plate return to the top. If you need restart the machine, turn the red round switch clockwise, the red button will bounce, then the machine could work again.