Features
· The temperature is controlled by electro-thermostat to ensure a high accuracy(±2).
· Scurity, durability and even heat distribution are achieved by integration of heat line and heat plate.
· TEFLON coating on the heating plate.
· Pressure is adjustable.
· Button plate is set with frothing silica gel can work under 250°C
SPECIFICATION
| Priting Area(CM) | 38*38 |
| Voltage(V) | 220 |
| Power(KW) | 1.8 |
| Temperature Range( °C) | 260 |
| Time Range(S) | 0-30 |
Operation
Plug the socket, turn on the power of machine, then indicator is working.
Attention: proper and stable protective ground-wire must be prepared for whole machine.
One: adjust the temperature to requested temperature, which usually between 120°C-200°C.
Two: set the timer to request time which usually between 5s-20s.
Three: put the material on the lower plate then place transfer paper (pay attention on front and back of it), Press handle till the end.
Attention: Strength mustn’t exceed thirty kg to protect normal working of handle.
Four: buzzer is working when timer indicated completion of hot-stamping, then replace the handle.
Five: if cold peel thermo printing paper, erase it by brush within five to ten seconds then peel the thermo printing paper.
