|Manual New high pressure t shirt heat press machine|
1.The temperature is controlled by electro-thermostat to ensure a high accuracy(±2).
2.Curity, durability and even heat distribution are achieved by integration of heat line and heat plate.
3.TEFLON coating on the heating plate.
4.It’s controlled by electronic time; signal light indicated the completion of process.
5.Pressure is adjustable.
6.Button plate is set with frothing silica gel can work under 250°C
Process of Transferring
1.Take the machine out from the carton
2.Check the machine to make sure every parts are on the position
3.Connect the power &Turn on the machine
4.Set the Time &Temperature
5.Put the T-shirt on the lower plate when the alarm comes out
6.Put the printer transfer paper on the T-shirt
7.Put the upper heat platen down, meanwhile, the time start counting down
8.Put the upper heat platen up when the alarm comes out again
9.Tear off transfer paper, the job has been done.