|Heating plate size(CM)||50*70|
|Time Range (S)||0-999|
|weight (KG)||150 kg|
|Packing Size(CM)||150*85*80 CM|
1. Interstitial-free steels, it can work stable bearing machine moves back and forth, it’s more reliable and durable.
2. Stabilizing device, make the touch between bottom and heating plate tighter and heavier, ensure the pressure more even and effect better.
3. Automatic induction device, make the heating plate and the bottom plate aligned with each other.
4. Machine structure strong and good looking.
5. 3.5 cm thick bottom plate, 1 cm thick heating plate, it can print large area.
1. Plug in the power supply, turn on the main power switch (red), the indicator light is on. Note: The whole machine must have a suitable protective ground wire);
2. Adjust the temperature controller to the required temperature and set the required time;
3. After adjusting the temperature and time, wait for the machine to heat up.
4. After the temperature rise is completed, the temperature meter OUT 1 light goes out and then flashes automatically. (when keeping warm)
5. After putting the required transfer fabric and drawing paper, pull the machine head to the left (or right) lower platen, and the heating plate will automatically press down. When the time is up, the machine will be on the machine.
The platen will rise automatically.