The temperature controlled by micro computer, which is very accurate, and High accurate
Electronic time control, automatic sound alarm when the printing is finished.
The heating principle adopts special ultraprecision ray tube technology and the board note asa whole, safe,
durable, heat distribution.
Operation
1.The operation control by digital, working procedure completes situation uses signal
indication, has the high accuracy.
1. Turn on power adjust the pressure you need
2. When the machine reaching the temp you set, place the printing object on working table,choose Manual/Automatic switch you want.
3. After reaching time, then you could take out the object.
4. Check all kinds of parts whether have loose or not before using.
6.Connect the air compressor, turn on power, and then adjust “Pressure adjust valve”
(usually 3-6kg/cm2) until the heating board rising up automatically.
5. Do not touch heating board when rising temp.
8.Before printing, you need to test some sample to get right pressure,time, temp you need.
Different sizes such as 120*150cm, 130*180cm, 150*250cm, 200*200cm are also available.
Warmly welcome customer design & logo
