High Grade Silicon Roller Heat Transfer Machine
1.Double silde out working table
|Printing area||80cm x 100cm(31"x39")|
• It has double slide out working table but only need one person to operate it.
• More convenient for printing.
• Higher pressure
• Suitable for large size printing material.
The heating plate surface with Teflon paint, dust, without high temperature cloth.
Intelligent digital display constant temperature controller, temperature control is accurate (+ 10)
Unique front pressure adjustment mode, the pressure adjustment, convenient and flexible
Digital display of electronic time, the process automatically issued a warning tone
Aluminum heating plate, electric tube and plate body pouring into one, uniform heating, durable
The surface of the heating surface is coated with high temperature and anti - adhesive layer, which is convenient for cleaning and anti-oxidation.
The high temperature resilient foaming silicone, 400 for the working table, is unchanged at.
The machine can be any color or monochrome images, text transfer to: ceramic, metal, glass, clothing etc. material, widely used in shop business, transfer personalized products, garment used.
Pick up the air source and make the machine open.. The test pressure is appropriate, if not appropriate, adjust the pressure knob. (clockwise to increase the pressure of the knob, counterclockwise rotation to reduce the pressure)
Ready to be hot stamping. (warming up process please do not be hot stamping material placed on the working platform, lest bad)
Open the power switch, the temperature controller began to self, about 10 seconds after the self-test and enter the working state, this time to set the working parameters,
(the first use of a good set of required: temperature, time, details of the attached instrument panel time and temperature operation instructions)
The temperature and time required to set the temperature, the machine starts heating up (the temperature rise to 200 minutes about 15 minutes).
Pending machine to achieve the desired temperature will require transfer of goods tile is placed on the work surface, is pressed down, the machine began to automatic timing, after reaching the set time, the machine automatically open.
Note: if there is an emergency, you need to stop the machine halfway, so that the heating board can rise, you can press the urgent stop button. The next time you use the emergency stop button to spin.
Time temperature setting:
Click the SET button, press 5 or 6 key to set the instrument to display the temperature. (usually 180-220, depending on the material),
Press the SET button again, switch to the setting time, press 5 or 6 key to set the required time (usually 2-3 minutes, depending on the material set).
Press the SET key to return to the standard mode. Set up.